{"product_id":"pde-bruecke-2-0-tdi-16v-komplett-set-bosch-oder-siemens-injektoren","title":"ORIGINAL PD injector bridge Complete Set 2.0 TDI 16V – Bosch or Siemens injectors","description":"\u003cdiv class=\"s07-pde-komplett s07-pde-bridge s07-pde-bridge-16v s07-pde-bridge-16v-komplett\"\u003e\n  \u003c!-- Deutsche Produktbeschreibung: Bosch-\/Siemens-Familie, 2026-11-09. --\u003e\n\n  \u003c!-- HERO --\u003e\n  \u003csection class=\"s07-pde-section s07-pde-hero\"\u003e\n    \u003cdiv class=\"s07-pde-eyebrow\"\u003eOriginal from 07eins · Complete set for 16V 2.0 TDI\u003c\/div\u003e\n\n    \u003ch1 class=\"s07-pde-hero-title\"\u003e\n      16V PD injector bridge Complete Set for Bosch or Siemens injectors\n    \u003c\/h1\u003e\n\n    \u003cp class=\"s07-pde-hero-subtitle\"\u003e\n      16V PD injector bridge + 16V fitting kit + 4× reinforced VITON seal sets\n    \u003c\/p\u003e\n\n    \u003cp class=\"s07-pde-lead\"\u003e\n      The 16V PD injector bridge Complete Set from 07eins is a coordinated repair package for compatible 2.0 TDI 16V engines with Bosch or Siemens unit injectors. It combines mechanical stabilisation of the unit injectors with suitable fitting components and reinforced VITON \/ FKM \/ FPM seals.\n    \u003c\/p\u003e\n    \u003cp class=\"s07-pde-lead\"\u003eSelect the variant to suit your unit injectors with screws on both sides: Bosch 071MTR001PD16-S04B or Siemens 071MTR001PD16-S04S. Retaining brackets, standard seals and VITON seals are matched to the selected version. Bosch and Siemens components must not be interchanged. The Siemens variant with the 16V PD injector bridge will be available from Q1 2027. \u003ca class=\"s07-pde-link\" href=\"\/en\/pages\/16v-siemens-warteliste\"\u003eJoin the waiting list\u003c\/a\u003e.\u003c\/p\u003e\n\n\n    \u003cdiv class=\"s07-pde-hero-card\"\u003e\n      \u003cstrong\u003eOpen it once — complete the job properly\u003c\/strong\u003e\n      \u003cspan\u003eIf the engine is already open for the PD injector overhaul or the fitting of the 16V PD injector bridge, the bridge, fitting kit and reinforced seals are combined into a practical set.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"s07-pde-cta-row s07-pde-cta-row--center\"\u003e\n      \u003ca href=\"\/en\/products\/original-16v-pd-injector-bridge-complete-set-for-2-0-tdi-16v-with-bosch-pdes\" class=\"s07-pde-button\"\u003e\n        Buy the 16V Complete Set\n      \u003c\/a\u003e\n      \u003ca href=\"#s07-16v-komplett-kompatibilitaet\" class=\"s07-pde-button s07-pde-button--light\"\u003e\n        Check compatibility\n      \u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- TRUST \/ USP --\u003e\n  \u003csection class=\"s07-pde-section\" aria-label=\"Benefits at a glance\"\u003e\n    \u003cdiv class=\"s07-pde-grid\"\u003e\n      \u003cdiv class=\"s07-pde-badge-card\"\u003e\n        \u003cdiv class=\"s07-pde-badge-number\"\u003e3-in-1\u003c\/div\u003e\n        \u003cdiv class=\"s07-pde-badge-title\"\u003eComplete Set\u003c\/div\u003e\n        \u003cp class=\"s07-pde-badge-text\"\u003e\n          16V PD injector bridge, 16V PD injector fitting kit and 4 reinforced VITON seal sets in a coordinated package.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-badge-card\"\u003e\n        \u003cdiv class=\"s07-pde-badge-number\"\u003e16V\u003c\/div\u003e\n        \u003cdiv class=\"s07-pde-badge-title\"\u003eBosch or Siemens PDEs\u003c\/div\u003e\n        \u003cp class=\"s07-pde-badge-text\"\u003e\n          For compatible 2.0 TDI 16V unit injector engines with unit injectors from Bosch or Siemens.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-badge-card\"\u003e\n        \u003cdiv class=\"s07-pde-badge-number\"\u003eVITON\u003c\/div\u003e\n        \u003cdiv class=\"s07-pde-badge-title\"\u003eFKM \/ FPM seals\u003c\/div\u003e\n        \u003cp class=\"s07-pde-badge-text\"\u003e\n          Reinforced 16V PD injector seal sets as a robust sealing supplement to mechanical PD injector stabilisation.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-badge-card\"\u003e\n        \u003cdiv class=\"s07-pde-badge-number\"\u003eDE\u003c\/div\u003e\n        \u003cdiv class=\"s07-pde-badge-title\"\u003eUtility model\u003c\/div\u003e\n        \u003cp class=\"s07-pde-badge-text\"\u003e\n          The 16V PDE injector bridge is protected by the ‘ 07eins ’ utility model DE 20 2026 100 196 U1.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PROBLEM \/ SOLUTION --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-grid\"\u003e\n      \u003cdiv class=\"s07-pde-card\"\u003e\n        \u003cdiv class=\"s07-pde-eyebrow\"\u003eProblem\u003c\/div\u003e\n\n        \u003ch2 class=\"s07-pde-h2\"\u003e\n          When new seals alone are no longer enough.\n        \u003c\/h2\u003e\n\n        \u003cp class=\"s07-pde-copy-large\"\u003e\n          In 16V 2.0 TDI engines with unit injectors, starting problems, rough running, jerking, diesel in the oil or recurring leaks from the unit injector seals may indicate that the unit injector is moving within its seat in the cylinder head.\n        \u003c\/p\u003e\n\n        \u003cp class=\"s07-pde-copy\"\u003e\n          In this situation, simply repairing the seals is often not enough. The key factor is whether the PDEs can be permanently stabilised and the new seals can operate under improved mechanical conditions once again.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-card s07-pde-card--blue\"\u003e\n        \u003cdiv class=\"s07-pde-eyebrow\"\u003eSolution\u003c\/div\u003e\n\n        \u003ch2 class=\"s07-pde-h2\"\u003e\n          Mechanical stabilisation plus new sealing.\n        \u003c\/h2\u003e\n\n        \u003cp class=\"s07-pde-copy-large\"\u003e\n          The 16V PDE injector bridge complete set combines the ORIGINAL 07eins 16V PDE injector bridge with matching fitting components and 4 reinforced VITON seal sets for the unit injector assemblies.\n        \u003c\/p\u003e\n\n        \u003cp class=\"s07-pde-copy\"\u003e\n          The PD injector bridge provides additional stabilisation for Bosch or Siemens PD injectors on the cylinder head. The reinforced VITON seals restore the seal. The fitting kit complements the repair with matching screws, model-specific standard seal sets and threadlocker.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- SET LOGIC --\u003e\n  \u003csection class=\"s07-pde-section s07-pde-dark\"\u003e\n    \u003cdiv class=\"s07-pde-eyebrow\"\u003eThought through in full\u003c\/div\u003e\n\n    \u003ch2 class=\"s07-pde-h2\"\u003e\n      The coordinated set variant for 16V 2.0 TDI PD injector work.\n    \u003c\/h2\u003e\n\n    \u003cp class=\"s07-pde-copy-large\"\u003e\n      This set is designed for anyone who, when removing the PDE units, doesn’t just want to replace individual components but wishes to carry out the repair to a high technical standard: mechanical fixing, new seals and suitable fitting materials.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"s07-pde-grid-3\"\u003e\n      \u003cdiv class=\"s07-pde-list-card\"\u003e\n        \u003cdiv class=\"s07-pde-feature\"\u003e\n          \u003cspan class=\"s07-pde-feature-title\"\u003eORIGINAL 16V PD injector bridge\u003c\/span\u003e\n          \u003cspan class=\"s07-pde-feature-text\"\u003e\n            Mechanically stabilises compatible Bosch or Siemens PD injectors on the cylinder head and reduces movement at the PD injector seat.\n          \u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-list-card\"\u003e\n        \u003cdiv class=\"s07-pde-feature\"\u003e\n          \u003cspan class=\"s07-pde-feature-title\"\u003e16V PD injector fitting kit\u003c\/span\u003e\n          \u003cspan class=\"s07-pde-feature-text\"\u003e\n            Complements the installation with rocker arm bolts, model-specific standard seal sets and threadlocker.\n          \u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-list-card\"\u003e\n        \u003cdiv class=\"s07-pde-feature\"\u003e\n          \u003cspan class=\"s07-pde-feature-title\"\u003e4× reinforced VITON seal sets\u003c\/span\u003e\n          \u003cspan class=\"s07-pde-feature-text\"\u003e\n            High-quality FKM\/FPM seals as a reinforced sealing base for the 4 unit injectors.\n          \u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- WHY COMPLETE SET --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-card s07-pde-card--soft\"\u003e\n      \u003cdiv class=\"s07-pde-eyebrow\"\u003eWhy choose the complete set?\u003c\/div\u003e\n\n      \u003ch2 class=\"s07-pde-h2\"\u003e\n        When the engine is open, the mechanical components, seal and mounting base should all fit together.\n      \u003c\/h2\u003e\n\n      \u003cp class=\"s07-pde-copy-large\"\u003e\n        Work on the unit injectors involves a considerable amount of labour. It therefore makes technical sense not to consider the accessible components in isolation. A new seal will only function well in the long term if the unit injector is properly guided mechanically and the mounting base is correct.\n      \u003c\/p\u003e\n\n      \u003cp class=\"s07-pde-copy\"\u003e\n        The 16V PD injector bridge complete set follows precisely this repair logic: The 16V PD injector bridge stabilises the system, the reinforced VITON seal kits provide an improved basis for sealing, and the fitting kit provides the appropriate consumables and fitting components for working on 16V Bosch or Siemens PD injectors.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- WHAT IT DOES --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-grid\"\u003e\n      \u003cdiv class=\"s07-pde-list-card\"\u003e\n        \u003cdiv class=\"s07-pde-feature\"\u003e\n          \u003cspan class=\"s07-pde-feature-title\"\u003eProvides additional stabilisation for the PDEs\u003c\/span\u003e\n          \u003cspan class=\"s07-pde-feature-text\"\u003e\n            The 16V PDE injector bridge attaches directly to the PDE injector housing and transfers the forces generated via an aluminium connecting strip to the cylinder head.\n          \u003c\/span\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"s07-pde-feature\"\u003e\n          \u003cspan class=\"s07-pde-feature-title\"\u003eImproves the operating conditions for the seals\u003c\/span\u003e\n          \u003cspan class=\"s07-pde-feature-text\"\u003e\n            When the movement of the PD injector is reduced, the new sealing rings are subjected to less adverse mechanical stress.\n          \u003c\/span\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"s07-pde-feature\"\u003e\n          \u003cspan class=\"s07-pde-feature-title\"\u003eReplaces the seals for each cylinder\u003c\/span\u003e\n          \u003cspan class=\"s07-pde-feature-text\"\u003e\n            The 4 reinforced 16V VITON seal sets are designed to seal the four unit injectors.\n          \u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-list-card s07-pde-list-card--blue\"\u003e\n        \u003cdiv class=\"s07-pde-feature\"\u003e\n          \u003cspan class=\"s07-pde-feature-title\"\u003eProvides a clean basis for installation\u003c\/span\u003e\n          \u003cspan class=\"s07-pde-feature-text\"\u003e\n            The 16V fitting kit complements the repair with rocker arm bolts, model-specific standard gasket sets and threadlocker.\n          \u003c\/span\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"s07-pde-feature\"\u003e\n          \u003cspan class=\"s07-pde-feature-title\"\u003eUseful for PD injector servicing\u003c\/span\u003e\n          \u003cspan class=\"s07-pde-feature-text\"\u003e\n            Ideal if the PDE units are already being removed, checked, resealed or worked on as part of the bridge installation.\n          \u003c\/span\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"s07-pde-feature\"\u003e\n          \u003cspan class=\"s07-pde-feature-title\"\u003eOriginal 07eins System logic\u003c\/span\u003e\n          \u003cspan class=\"s07-pde-feature-text\"\u003e\n            Not a loose collection of individual parts, but a coordinated package centred around the 16V PD injector bridge.\n          \u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- TECHNICAL PRINCIPLE --\u003e\n  \u003csection class=\"s07-pde-section s07-pde-card\"\u003e\n    \u003cdiv class=\"s07-pde-eyebrow\"\u003eTechnical principle\u003c\/div\u003e\n\n    \u003ch2 class=\"s07-pde-h2\"\u003e\n      Stabilise, seal, fit neatly.\n    \u003c\/h2\u003e\n\n    \u003cp class=\"s07-pde-copy-large\"\u003e\n      The 16V PD injector bridge combines a thermally appropriate aluminium connecting strip with heavy-duty quenched and tempered steel brackets. The connecting bar is bolted to the cylinder head, whilst the brackets engage directly with the PD injector housing. Adjustment plates allow for tolerance compensation and a defined preload.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"s07-pde-grid-3\"\u003e\n      \u003cdiv class=\"s07-pde-list-card\"\u003e\n        \u003cdiv class=\"s07-pde-feature\"\u003e\n          \u003cspan class=\"s07-pde-feature-title\"\u003eAluminium connecting strip\u003c\/span\u003e\n          \u003cspan class=\"s07-pde-feature-text\"\u003e\n            Thermally compatible with the aluminium cylinder head and designed as a firmly bolted abutment.\n          \u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-list-card\"\u003e\n        \u003cdiv class=\"s07-pde-feature\"\u003e\n          \u003cspan class=\"s07-pde-feature-title\"\u003eQuenched and tempered steel bracket\u003c\/span\u003e\n          \u003cspan class=\"s07-pde-feature-text\"\u003e\n            High local strength directly at the stressed retaining and clamping areas of the unit injector.\n          \u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-list-card\"\u003e\n        \u003cdiv class=\"s07-pde-feature\"\u003e\n          \u003cspan class=\"s07-pde-feature-title\"\u003eAdjustment plates\u003c\/span\u003e\n          \u003cspan class=\"s07-pde-feature-text\"\u003e\n            For tolerance compensation, defined preload and individual adaptation to the actual installation situation.\n          \u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- SYMPTOMS --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-card\"\u003e\n      \u003cdiv class=\"s07-pde-eyebrow\"\u003eIdentifying typical PDE problems\u003c\/div\u003e\n\n      \u003ch2 class=\"s07-pde-h2\"\u003e\n        These symptoms may indicate leaky or mechanically stressed 16V PDEs.\n      \u003c\/h2\u003e\n\n      \u003cp class=\"s07-pde-copy-large\"\u003e\n        Many drivers first notice the symptoms, not the cause. In 16V 2.0 TDI engines with unit injectors, leaking unit injectors, unit injectors that move, or unit injectors that are no longer properly seated can cause various problems.\n      \u003c\/p\u003e\n\n      \u003cdiv class=\"s07-pde-grid\"\u003e\n        \u003cdiv class=\"s07-pde-list-card\"\u003e\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eStarting difficulties when cold or warm\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              The engine starts less easily after a long period of inactivity or even when warm.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eUneven engine running and jerking\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              The engine runs roughly, shakes when idling or responds unevenly whilst driving.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003ePower loss\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              Impaired sealing or a disturbed PD injector position may become noticeable through reduced pulling power.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"s07-pde-list-card\"\u003e\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eDiesel in the oil \/ rising oil level\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              A rising oil level or the smell of diesel in the engine oil should be taken seriously in unit injector engines.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eRecurring leaks in unit injector seals\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              If new seals start to leak again, the mechanical seating condition of the PD injector should be checked.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eWear marks on the PD injector seat\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              Visible wear marks indicate that the unit injectors may have moved within the cylinder head.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-cta-row s07-pde-cta-row--center\"\u003e\n        \u003ca href=\"\/en\/pages\/pde-problem-check-for-tdi-engines\" class=\"s07-pde-button\"\u003e\n          Open PDE injector problem check\n        \u003c\/a\u003e\n        \u003ca href=\"\/en\/blogs\/news\/rising-oil-level-in-tdi-engines-with-unit-injectors-causes-permanent-solution\" class=\"s07-pde-button s07-pde-button--light\"\u003e\n          Read more about diesel in engine oil\n        \u003c\/a\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PDE \/ INJECTOR NUMBERS --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-card\"\u003e\n      \u003cdiv class=\"s07-pde-eyebrow\"\u003ePD injector\/injector comparison numbers\u003c\/div\u003e\n\n      \u003ch2 class=\"s07-pde-h2\"\u003e\n        PD injector part numbers help with the compatibility check.\n      \u003c\/h2\u003e\n\n      \u003cp class=\"s07-pde-copy-large\"\u003e\n        You can check whether the PD injector design is generally suitable for use with the 16V PD injector bridge by referring to the OE and Bosch part numbers of the unit injectors fitted in the engine.\n      \u003c\/p\u003e\n\n      \u003cp class=\"s07-pde-copy\"\u003e\n        The following numbers refer to the Bosch unit injector or the pump-nozzle injector fitted. They are not part numbers for the 16V PDE injector bridge, but are used to identify the correct PDE variant.\n      \u003c\/p\u003e\n\n      \u003cdiv class=\"s07-pde-pill-row\"\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003e0414720404\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003e0414720454\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003e0986441516\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003e0986441566\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003e03G130073G\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003e03G130073GX\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003e03G130073B\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003e03G130073BX\u003c\/span\u003e\n      \u003c\/div\u003e\n\n      \u003cp class=\"s07-pde-copy\" style=\"margin-top:18px;\"\u003e\n        The specific PD injector variant actually fitted in the vehicle remains crucial. The engine code, PD injector number and vehicle data should all be checked together before ordering.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- COMPATIBILITY INTRO --\u003e\n  \u003csection id=\"s07-16v-komplett-kompatibilitaet\" class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-card\"\u003e\n      \u003cdiv class=\"s07-pde-eyebrow\"\u003eCheck compatibility\u003c\/div\u003e\n\n      \u003ch2 class=\"s07-pde-h2\"\u003e\n        Bosch version: suitable vehicle models.\n      \u003c\/h2\u003e\n\n      \u003cp class=\"s07-pde-copy-large\"\u003e\n        This complete set is designed for compatible 2.0 TDI 16V unit-injector engines with unit injectors and Bosch or Siemens PD injectors. The engine code, vehicle specifications and the actual PDE\/injector variant fitted are decisive.\n      \u003c\/p\u003e\n\n      \u003cp class=\"s07-pde-copy\"\u003e\n        For the Bosch variant, the engine codes apply \u003cstrong\u003eAZV, BKD, BLB, BNA, BRE, BVF, BVG and BRF\u003c\/strong\u003e. Not suitable for common-rail engines or 8V PD injector versions. Bosch and Siemens components must not be interchanged.\n      \u003c\/p\u003e\n\n      \u003cdiv class=\"s07-pde-pill-row\" style=\"margin-top:16px;\"\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003eAZV\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003eBKD\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003eBLB\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003eBNA\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003eBRE\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003eBVF\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003eBVG\u003c\/span\u003e\n        \u003cspan class=\"s07-pde-pill\"\u003eBRF\u003c\/span\u003e\n      \u003c\/div\u003e\n\n      \u003cp class=\"s07-pde-copy\" style=\"margin-top:18px;\"\u003e\n        \u003cstrong\u003eImportant:\u003c\/strong\u003e This list shows the current 07eins initial compatibility. If your engine code is not listed, your engine may still be affected. Please contact us briefly with your engine code, vehicle details and PDE injector number – we will check suitability and update the list as soon as compatibility has been clearly confirmed.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- COMPATIBILITY CARDS --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-grid\"\u003e\n      \u003cdiv class=\"s07-pde-card\"\u003e\n        \u003ch2 class=\"s07-pde-h2\"\u003eAudi A3 8P \/ A3 Sportback 8PA\u003c\/h2\u003e\n        \u003cp class=\"s07-pde-copy\"\u003e\n          \u003cstrong\u003eMKB:\u003c\/strong\u003e AZV, BKD\u003cbr\u003e\n          \u003cstrong\u003eEngine:\u003c\/strong\u003e 2.0 TDI \/ 2.0 TDI 16V\u003cbr\u003e\n          \u003cstrong\u003eEngine capacity \/ Power:\u003c\/strong\u003e 1968 ccm · 100–103 kW \/ 136–140 PS\u003cbr\u003e\n          \u003cstrong\u003eNote:\u003c\/strong\u003e Suitable only for vehicles fitted with Bosch PD injectors and a compatible 16V PD injector variant.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-card\"\u003e\n        \u003ch2 class=\"s07-pde-h2\"\u003eAudi A4 B7 \/ A4 Avant B7\u003c\/h2\u003e\n        \u003cp class=\"s07-pde-copy\"\u003e\n          \u003cstrong\u003eMKB:\u003c\/strong\u003e BLB, BNA, BRE, BVF, BVG, BRF\u003cbr\u003e\n          \u003cstrong\u003eEngine type:\u003c\/strong\u003e 2.0 TDI \/ 2.0 TDI 16V\u003cbr\u003e\n          \u003cstrong\u003eEngine capacity \/ Power:\u003c\/strong\u003e 1968 ccm · 89–103 kW \/ 121–140 PS, depending on MKB\u003cbr\u003e\n          \u003cstrong\u003eNote:\u003c\/strong\u003e Carefully check the PDE injector design, particularly in longitudinally mounted 2.0 TDI PD 16V engines.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-card\"\u003e\n        \u003ch2 class=\"s07-pde-h2\"\u003eAudi A6 C6 \/ A6 Avant C6\u003c\/h2\u003e\n        \u003cp class=\"s07-pde-copy\"\u003e\n          \u003cstrong\u003eMKB:\u003c\/strong\u003e BLB, BNA, BRE, BVG, BRF\u003cbr\u003e\n          \u003cstrong\u003eEngine type:\u003c\/strong\u003e 2.0 TDI \/ 2.0 TDI 16V\u003cbr\u003e\n          \u003cstrong\u003eEngine capacity \/ Power:\u003c\/strong\u003e 1968 ccm · 100–103 kW \/ 136–140 PS\u003cbr\u003e\n          \u003cstrong\u003eNote:\u003c\/strong\u003e Suitable only for compatible Bosch unit injectors.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-card\"\u003e\n        \u003ch2 class=\"s07-pde-h2\"\u003eSEAT Altea 5P \/ Altea XL 5P\u003c\/h2\u003e\n        \u003cp class=\"s07-pde-copy\"\u003e\n          \u003cstrong\u003eMKB:\u003c\/strong\u003e AZV, BKD\u003cbr\u003e\n          \u003cstrong\u003eEngine:\u003c\/strong\u003e 2.0 TDI \/ 2.0 TDI 16V\u003cbr\u003e\n          \u003cstrong\u003eEngine capacity \/ Power:\u003c\/strong\u003e 1968 ccm · 100–103 kW \/ 136–140 PS\u003cbr\u003e\n          \u003cstrong\u003eNote:\u003c\/strong\u003e Check compatibility using the engine code and PD injector number.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-card\"\u003e\n        \u003ch2 class=\"s07-pde-h2\"\u003eSEAT Leon 1P \/ Toledo III 5P\u003c\/h2\u003e\n        \u003cp class=\"s07-pde-copy\"\u003e\n          \u003cstrong\u003eMKB:\u003c\/strong\u003e AZV, BKD\u003cbr\u003e\n          \u003cstrong\u003eEngine:\u003c\/strong\u003e 2.0 TDI \/ 2.0 TDI 16V\u003cbr\u003e\n          \u003cstrong\u003eEngine capacity \/ Power:\u003c\/strong\u003e 1968 ccm · 100–103 kW \/ 136–140 PS\u003cbr\u003e\n          \u003cstrong\u003eNote:\u003c\/strong\u003e Bosch version: for the specified Bosch PDE units only; not for Common Rail or Siemens PDE units.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-card\"\u003e\n        \u003ch2 class=\"s07-pde-h2\"\u003eŠkoda Octavia II 1Z \/ Octavia II Estate 1Z\u003c\/h2\u003e\n        \u003cp class=\"s07-pde-copy\"\u003e\n          \u003cstrong\u003eMKB:\u003c\/strong\u003e AZV, BKD\u003cbr\u003e\n          \u003cstrong\u003eEngine type:\u003c\/strong\u003e 2.0 TDI \/ 2.0 TDI 16V\u003cbr\u003e\n          \u003cstrong\u003eEngine capacity \/ Power:\u003c\/strong\u003e 1968 ccm · 100–103 kW \/ 136–140 PS\u003cbr\u003e\n          \u003cstrong\u003eNote:\u003c\/strong\u003e Suitable only for Bosch PDE units in the appropriate 16V version.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-card\"\u003e\n        \u003ch2 class=\"s07-pde-h2\"\u003eŠkoda Superb II 3T \/ Superb II Estate 3T\u003c\/h2\u003e\n        \u003cp class=\"s07-pde-copy\"\u003e\n          \u003cstrong\u003eMKB:\u003c\/strong\u003e BKD subject to vehicle and PDE inspection\u003cbr\u003e\n          \u003cstrong\u003eEngine type:\u003c\/strong\u003e 2.0 TDI 16V\u003cbr\u003e\n          \u003cstrong\u003eEngine capacity \/ Power:\u003c\/strong\u003e 1968 ccm · 103 kW \/ 140 PS\u003cbr\u003e\n          \u003cstrong\u003eNote:\u003c\/strong\u003e Listed as compatible only after the unit-injector design has been positively verified.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-card\"\u003e\n        \u003ch2 class=\"s07-pde-h2\"\u003eVW Golf V 1K \/ Golf V Estate \/ Golf Plus\u003c\/h2\u003e\n        \u003cp class=\"s07-pde-copy\"\u003e\n          \u003cstrong\u003eMKB:\u003c\/strong\u003e AZV, BKD\u003cbr\u003e\n          \u003cstrong\u003eEngine type:\u003c\/strong\u003e 2.0 TDI \/ 2.0 TDI 16V\u003cbr\u003e\n          \u003cstrong\u003eEngine capacity \/ Power:\u003c\/strong\u003e 1968 ccm · 100–103 kW \/ 136–140 PS\u003cbr\u003e\n          \u003cstrong\u003eNote:\u003c\/strong\u003e Typical 2.0 TDI 16V test candidates with Bosch PDEs.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-card\"\u003e\n        \u003ch2 class=\"s07-pde-h2\"\u003eVW Jetta V \/ Jetta III 1K2\u003c\/h2\u003e\n        \u003cp class=\"s07-pde-copy\"\u003e\n          \u003cstrong\u003eMKB:\u003c\/strong\u003e AZV, BKD\u003cbr\u003e\n          \u003cstrong\u003eEngine:\u003c\/strong\u003e 2.0 TDI \/ 2.0 TDI 16V\u003cbr\u003e\n          \u003cstrong\u003eEngine capacity \/ Power:\u003c\/strong\u003e 1968 ccm · 100–103 kW \/ 136–140 PS\u003cbr\u003e\n          \u003cstrong\u003eNote:\u003c\/strong\u003e Check the PD injector\/injector comparison number before ordering.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-card\"\u003e\n        \u003ch2 class=\"s07-pde-h2\"\u003eVW Touran 1T\u003c\/h2\u003e\n        \u003cp class=\"s07-pde-copy\"\u003e\n          \u003cstrong\u003eMKB:\u003c\/strong\u003e AZV, BKD\u003cbr\u003e\n          \u003cstrong\u003eEngine:\u003c\/strong\u003e 2.0 TDI \/ 2.0 TDI 16V\u003cbr\u003e\n          \u003cstrong\u003eEngine capacity \/ Power:\u003c\/strong\u003e 1968 ccm · 100–103 kW \/ 136–140 PS\u003cbr\u003e\n          \u003cstrong\u003eNote:\u003c\/strong\u003e Suitable only for the corresponding Bosch unit injector version.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- SET CONTENT --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-card s07-pde-card--blue\"\u003e\n      \u003cdiv class=\"s07-pde-eyebrow\"\u003eSet components\u003c\/div\u003e\n\n      \u003ch2 class=\"s07-pde-h2\"\u003e\n        This is included in the 16V PD injector bridge complete set.\n      \u003c\/h2\u003e\n\n      \u003cdiv class=\"s07-pde-grid-3\"\u003e\n        \u003cdiv class=\"s07-pde-list-card s07-pde-list-card--blue\"\u003e\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003e1× 16V PD injector bridge\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              The protected 07eins solution for additional stabilisation of compatible Bosch or Siemens PDEs in the 2.0 TDI 16V.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-cta-row\"\u003e\n            \u003ca href=\"\/en\/products\/original-16v-pd-injector-bridge-for-2-0-tdi-16v-with-bosch-pdes\" class=\"s07-pde-button s07-pde-button--light\"\u003e\n              View individual product\n            \u003c\/a\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"s07-pde-list-card s07-pde-list-card--blue\"\u003e\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003e1× 16V PD injector fitting kit\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              Includes rocker arm bolts, model-specific standard seal kits \/ repair kits and threadlocker.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-cta-row\"\u003e\n            \u003ca href=\"\/en\/products\/16v-pde-installation-kit-for-16v-2-0-tdi-with-bosch-pde-4-cylinder\" class=\"s07-pde-button s07-pde-button--light\"\u003e\n              View the fitting kit\n            \u003c\/a\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"s07-pde-list-card s07-pde-list-card--blue\"\u003e\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003e4× 16V VITON seal set\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              Reinforced VITON \/ FKM \/ FPM seal sets for the 4 unit injectors.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-cta-row\"\u003e\n            \u003ca href=\"\/en\/products\/16v-viton-reinforced-gasket-set-for-16v-2-0-tdi-volkswagen-audi-seat-skoda\" class=\"s07-pde-button s07-pde-button--light\"\u003e\n              View VITON seals\n            \u003c\/a\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- DELIVERY SCOPE --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-card s07-pde-card--soft\"\u003e\n      \u003ch2 class=\"s07-pde-h2\"\u003e\n        Contents\n      \u003c\/h2\u003e\n\n      \u003cdiv class=\"s07-pde-list-card\"\u003e\n        \u003cul class=\"s07-pde-scope-list\"\u003e\n          \u003cli\u003e1 × 16V PD injector bridge aluminium connecting strip, blue anodised \u003cstrong\u003e(071MTR001PD16-VL)\u003c\/strong\u003e\n\u003c\/li\u003e\n          \u003cli\u003e4 × quenched and tempered steel brackets for the 16V PD injector bridge \u003cstrong\u003e(Bosch: 071MTR001PD16-HBB; Siemens: 071MTR001PD16-HBS)\u003c\/strong\u003e\n\u003c\/li\u003e\n          \u003cli\u003e12 × 16V PD injector bridge shim, 0.5 mm \u003cstrong\u003e(071MTR001PD16-EB)\u003c\/strong\u003e\n\u003c\/li\u003e\n          \u003cli\u003e8 × 07eins 16V PDE injector bolt M6 × 95 \u003cstrong\u003e(071MTR001ISM6-95-8)\u003c\/strong\u003e\n\u003c\/li\u003e\n          \u003cli\u003e8 × 07eins 16V M6 × 16 socket head cap screws, DIN 6912, 10.9 \u003cstrong\u003e(071MTR001ZSM6-16-8)\u003c\/strong\u003e\n\u003c\/li\u003e\n          \u003cli\u003e4 × 07eins 16V M4 × 8 socket head cap screws, DIN 912 \/ ISO 4762, 10.9 \u003cstrong\u003e(071MTR001ZSM4-8-4)\u003c\/strong\u003e\n\u003c\/li\u003e\n          \u003cli\u003e4 × 07eins 16V M8 × 30 socket head cap screws, galvanised, 10.9 \u003cstrong\u003e(071MTR001ZSM8-30-4)\u003c\/strong\u003e\n\u003c\/li\u003e\n          \u003cli\u003e4 × 07eins 16V M8 washer, 8.4 × 15.0 × 1.6 stainless steel \u003cstrong\u003e(071MTR001BSM8-8151-4)\u003c\/strong\u003e\n\u003c\/li\u003e\n          \u003cli\u003e1 × 16V PD injector fitting kit for 16V 2.0 TDI with Bosch or Siemens PD injectors \u003cstrong\u003e(Bosch: 071MTR001PD16-SMB; Siemens: 071MTR001PD16-SMS)\u003c\/strong\u003e\n\u003c\/li\u003e\n          \u003cli\u003e5 × rocker arm bolt M8 × 58 \u003cstrong\u003e(N10581101)\u003c\/strong\u003e\n\u003c\/li\u003e\n          \u003cli\u003e4 × model-specific standard seal set \/ repair kit \u003cstrong\u003e(Bosch: 071MTR001PD16-D01B, part number 1417010996; Siemens: 071MTR001PD16-D01S)\u003c\/strong\u003e\n\u003c\/li\u003e\n          \u003cli\u003e1 × high-quality threadlocker in a dosing syringe\u003c\/li\u003e\n          \u003cli\u003e4 × reinforced 16V VITON \/ FKM \/ FPM PDE seal set \u003cstrong\u003e(Bosch: 071MTR001PD16-V01B; Siemens: 071MTR001PD16-V01S)\u003c\/strong\u003e\n\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"s07-pde-card s07-pde-card--warning\" style=\"margin-top:18px;\"\u003e\n        \u003cdiv class=\"s07-pde-eyebrow s07-pde-eyebrow--dark\"\u003eInstallation instructions\u003c\/div\u003e\n\n        \u003ch2 class=\"s07-pde-h2\"\u003e\n          The 07eins 16V PDE injector bolts must be used.\n        \u003c\/h2\u003e\n\n        \u003cp class=\"s07-pde-copy-large\"\u003e\n          To fit the 16V PD injector bridge, the supplied \u003cstrong\u003e8 × 07eins 16V PDE injector bolts M6 × 95\u003c\/strong\u003e must be used.\n        \u003c\/p\u003e\n\n        \u003cp class=\"s07-pde-copy\"\u003e\n          These bolts are longer than the factory-fitted injector bolts and are designed to match the additional component geometry of the 16V PD injector bridge. The standard bolts must not be reused in this location.\n        \u003c\/p\u003e\n\n        \u003cp class=\"s07-pde-copy\" style=\"margin-bottom:0;\"\u003e\n          Only use the threadlocker included in the fitting kit on screws intended for fitting the PD injector bridge or the corresponding 07eins retaining elements.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- ORIGINAL 07EINS \/ WHY --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-card\"\u003e\n      \u003cdiv class=\"s07-pde-eyebrow\"\u003eWhy 07eins\u003c\/div\u003e\n\n      \u003ch2 class=\"s07-pde-h2\"\u003e\n        Don’t just seal it. Stabilise the root cause.\n      \u003c\/h2\u003e\n\n      \u003cp class=\"s07-pde-copy-large\"\u003e\n        With unit injector engines, simply fitting new seals is often not enough. When the unit injector moves in its seat, even new seals are subjected to mechanical stress once again.\n      \u003c\/p\u003e\n\n      \u003cp class=\"s07-pde-copy\"\u003e\n        That is why 07eins tackles the 16V PD injector bridge by addressing the movement itself: the unit injector is stabilised on the housing, the forces are transferred to the cylinder head via the aluminium connecting strip, and tolerances are compensated for using shims. The complete set complements this mechanical solution with reinforced seals and suitable fitting hardware.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \n  \u003csection class=\"s07-pde-section s07-pde-card s07-pde-card--soft\"\u003e\n    \u003cdiv class=\"s07-pde-eyebrow\"\u003eSiemens variant · Compatibility\u003c\/div\u003e\n    \u003ch2 class=\"s07-pde-h2\"\u003eCheck both the engine code and the fitted Siemens PD injector together.\u003c\/h2\u003e\n    \u003cp class=\"s07-pde-copy\"\u003eFor the Siemens version, the following assignments are documented: BKP, BMA, BVE and BWV for reference 03G 130 073 SX; BMN, BMR and BUZ for reference 03G 130 073 TX. The external geometry relevant to the bridge configuration of the S\/SX and T\/TX families is identical. This does not constitute authorisation for the electrical or hydraulic interchangeability of the injectors.\u003c\/p\u003e\n    \u003cp class=\"s07-pde-copy\"\u003eThe vehicle specifications, engine code and the actual PDE\/OE number fitted are crucial. If the specifications differ or are unclear, we will clarify the correct fitment before you place your order.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- SUPPORT --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-card\"\u003e\n      \u003ch2 class=\"s07-pde-h2\"\u003e\n        Additional support on the 07eins website\n      \u003c\/h2\u003e\n\n      \u003cdiv class=\"s07-pde-grid\"\u003e\n        \u003cdiv class=\"s07-pde-list-card\"\u003e\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eCompatibility check\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              Check the engine code, vehicle model and PD injector comparison number.\n              \u003ca class=\"s07-pde-link\" href=\"#s07-16v-komplett-kompatibilitaet\"\u003eCheck compatibility\u003c\/a\u003e\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eFitting instructions\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              Support for carrying out your own PDE work and installation steps.\n              \u003ca class=\"s07-pde-link\" href=\"\/en\/pages\/diy-own-installation\"\u003eGo to the fitting instructions\u003c\/a\u003e\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"s07-pde-list-card\"\u003e\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eWorkshop Finder\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              Have the repair carried out by an 07eins partner workshop.\n              \u003ca class=\"s07-pde-link\" href=\"\/en\/pages\/einbau-werkstaetten\"\u003eFind a workshop\u003c\/a\u003e\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eEnquire about engine\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              If you are unsure about the MKB, PDE injector number or vehicle specifications, suitability can be assessed in advance.\n              \u003ca class=\"s07-pde-link\" href=\"\/en\/pages\/contact-us\"\u003eGet in touch\u003c\/a\u003e\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- DELIVERY TIME --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-card\"\u003e\n      \u003ch2 class=\"s07-pde-h2\"\u003e\n        Delivery time\n      \u003c\/h2\u003e\n\n      \u003cp class=\"s07-pde-copy-large\" style=\"margin-bottom:0;\"\u003e\n        Availability depends on the selected variant and the information displayed in the shop. Items in stock are dispatched upon receipt of payment; orders received and paid for by 11:00 am are usually dispatched on the same day. The Siemens variant with the 16V PD injector bridge will be available from Q1 2027.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPORTANT NOTES --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-card s07-pde-card--warning\"\u003e\n      \u003cdiv class=\"s07-pde-eyebrow s07-pde-eyebrow--dark\"\u003eImportant notes\u003c\/div\u003e\n\n      \u003ch2 class=\"s07-pde-h2\"\u003e\n        Please check before ordering.\n      \u003c\/h2\u003e\n\n      \u003cdiv class=\"s07-pde-grid\"\u003e\n        \u003cdiv class=\"s07-pde-list-card\"\u003e\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eImportant note on compatibility\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              The 16V PD injector bridge complete set is designed for compatible 2.0 TDI 16V engines with unit injectors that use Bosch or Siemens PD injectors. Common-rail engines and 8V PD injector variants are not included in this scope of application. The correct variant is required for both Bosch and Siemens PDEs.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eCheck before ordering\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              Before ordering, check the engine code, vehicle details and the fitted PD injector number. If in doubt, please clarify compatibility directly with 07eins.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-cta-row\"\u003e\n            \u003ca href=\"#s07-16v-komplett-kompatibilitaet\" class=\"s07-pde-button\"\u003eCheck compatibility\u003c\/a\u003e\n            \u003ca href=\"\/en\/pages\/contact-us\" class=\"s07-pde-button s07-pde-button--light\" target=\"_blank\" title=\"Enquire about engine\" rel=\"noopener\"\u003eEnquire about engine\u003c\/a\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"s07-pde-list-card\"\u003e\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eImportant note on the effect\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              The 16V PD injector bridge is designed to minimise the effects of the factory-fitted PD injector movement and to improve the mechanical operating conditions of the unit injector seals.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eEarly installation recommended\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              Early use can reduce the strain on the PD injector seat and limit the effects of any wear marks that have already begun to appear. However, damage to the cylinder head, the sealing surfaces or the PD injector seat that is too far advanced cannot be fully compensated for, even with the complete set.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n\n          \u003cdiv class=\"s07-pde-feature\"\u003e\n            \u003cspan class=\"s07-pde-feature-title\"\u003eFitting and follow-up costs\u003c\/span\u003e\n            \u003cspan class=\"s07-pde-feature-text\"\u003e\n              Fitting costs, removal costs, consumables, diagnostic costs and other associated costs are the responsibility of the customer and will not be reimbursed.\n            \u003c\/span\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- LEGAL --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-card\"\u003e\n      \u003cdiv class=\"s07-pde-eyebrow\"\u003eUtility model DE 20 2026 100 196 U1\u003c\/div\u003e\n\n      \u003ch2 class=\"s07-pde-h2\"\u003e\n        07eins’s proprietary development.\n      \u003c\/h2\u003e\n\n      \u003cp class=\"s07-pde-copy-large\"\u003e\n        The 16V PD injector bridge included in the complete set is based on a technical development by 07eins, which is registered in Germany as utility model DE 20 2026 100 196 U1.\n      \u003c\/p\u003e\n\n      \u003cp class=\"s07-pde-copy\"\u003e\n        The scope of protection is determined by the claims of the utility model; the description and drawings serve to interpret them. The invention covers a device for stabilising, securing and positioning unit injectors, comprising retaining elements, a connecting strip and an additional support, contact or fastening area.\n      \u003c\/p\u003e\n\n      \u003cp class=\"s07-pde-copy\" style=\"margin-bottom:0;\"\u003e\n        The manufacture, offering for sale and commercial distribution of a replica solution covered by the utility model are not permitted in Germany without the consent of the rights holder.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003csection class=\"s07-pde-section\"\u003e\n    \u003cdiv class=\"s07-pde-card s07-pde-card--soft\"\u003e\n      \u003cdiv class=\"s07-pde-eyebrow\"\u003eFAQ\u003c\/div\u003e\n\n      \u003ch2 class=\"s07-pde-h2\"\u003e\n        Frequently asked questions about the 16V PD injector bridge complete set.\n      \u003c\/h2\u003e\n\n      \u003cdetails class=\"s07-pde-list-card\"\u003e\n        \u003csummary class=\"s07-pde-feature-title\"\u003eA single 16V PD injector bridge, complete set or Ultimate set: what do I need?\u003c\/summary\u003e\n        \u003cp class=\"s07-pde-copy\" style=\"margin-top:12px;\"\u003eThe individual 16V PD injector bridge provides the mechanical stabilisation solution. The Complete Set adds the 16V PD injector fitting kit and four reinforced 16V VITON seal kits. The Ultimate Set also includes an ORIGINAL VW wiring harness whose plastic rail is already shortened by 07eins for use with the 16V PD injector bridge. This lets you choose the contents to suit your planned work.\u003c\/p\u003e\n      \u003c\/details\u003e\n\n      \u003cdetails class=\"s07-pde-list-card\" style=\"margin-top:12px;\"\u003e\n        \u003csummary class=\"s07-pde-feature-title\"\u003eDoes the 16V fitting kit contain reinforced VITON seals?\u003c\/summary\u003e\n        \u003cp class=\"s07-pde-copy\" style=\"margin-top:12px;\"\u003eThe individual 16V PD injector fitting kit contains standard gasket sets or repair kits suitable for the selected Bosch or Siemens version. The reinforced 07eins 16V VITON gasket sets are also included in the Complete Set and the Ultimate Set: four gasket sets in each, each containing 2 sealing rings for the four PDEs.\u003c\/p\u003e\n      \u003c\/details\u003e\n\n      \u003cdetails class=\"s07-pde-list-card\" style=\"margin-top:12px;\"\u003e\n        \u003csummary class=\"s07-pde-feature-title\"\u003eWhich engines are the 16V PD injector bridge and its sets suitable for?\u003c\/summary\u003e\n        \u003cp class=\"s07-pde-copy\" style=\"margin-top:12px;\"\u003eThe 16V PD injector bridge and the associated sets are designed for compatible 2.0 TDI 16V unit injector engines with Bosch or Siemens PD injectors. Before making your selection, check the engine code and the actual PD injector type fitted. Common-rail engines and 8V PD injector versions are not covered by this application range. Select the appropriate variant for Bosch or Siemens PD injectors.\u003c\/p\u003e\n      \u003c\/details\u003e\n\n      \u003cdetails class=\"s07-pde-list-card\" style=\"margin-top:12px;\"\u003e\n        \u003csummary class=\"s07-pde-feature-title\"\u003eWhich engine codes does 07eins list for the 16V PD injector bridge?\u003c\/summary\u003e\n        \u003cp class=\"s07-pde-copy\" style=\"margin-top:12px;\"\u003eThe Bosch version is intended for compatible 2.0 TDI 16V engines with Bosch PD injectors bolted on both sides and the following MKB codes: AZV, BKD, BLB, BNA, BRE, BVF, BVG and BRF. For Siemens units, the separately listed correspondences apply. Always check the PD injector actually fitted. \u003c\/p\u003e\n      \u003c\/details\u003e\n\n      \u003cdetails class=\"s07-pde-list-card\" style=\"margin-top:12px;\"\u003e\n        \u003csummary class=\"s07-pde-feature-title\"\u003eWhy do the Complete and Ultimate Sets contain four VITON seal sets?\u003c\/summary\u003e\n        \u003cp class=\"s07-pde-copy\" style=\"margin-top:12px;\"\u003eThe 2.0 TDI 16V has four cylinders and four unit injectors. Each of the two sets therefore contains four reinforced 16V VITON seal kits, each with two sealing rings: one seal kit per unit injector.\u003c\/p\u003e\n      \u003c\/details\u003e\n\n      \u003cdetails class=\"s07-pde-list-card\" style=\"margin-top:12px;\"\u003e\n        \u003csummary class=\"s07-pde-feature-title\"\u003eWhy does the 16V PD injector bridge combine aluminium and quenched and tempered steel?\u003c\/summary\u003e\n        \u003cp class=\"s07-pde-copy\" style=\"margin-top:12px;\"\u003eThe combination of materials combines thermal compensation with targeted clamping force: the aluminium connecting strip takes into account the thermal behaviour of the aluminium cylinder head. The retaining brackets made of quenched and tempered steel provide the clamping force and dimensional stability where they are locally required.\u003c\/p\u003e\n      \u003c\/details\u003e\n\n      \u003cdetails class=\"s07-pde-list-card\" style=\"margin-top:12px;\"\u003e\n        \u003csummary class=\"s07-pde-feature-title\"\u003eWhat is the function of the shims on the 16V PD injector bridge?\u003c\/summary\u003e\n        \u003cp class=\"s07-pde-copy\" style=\"margin-top:12px;\"\u003eThe shims compensate for tolerances and enable a defined preload. This allows the retaining brackets to bear properly against the connecting strip. Selection and fitting follow the relevant installation instructions.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- FINAL CTA --\u003e\n  \u003csection class=\"s07-pde-section s07-pde-final\"\u003e\n    \u003cdiv class=\"s07-pde-eyebrow\"\u003eOriginal 07eins Complete Set\u003c\/div\u003e\n\n    \u003ch2 class=\"s07-pde-h2\"\u003e\n      Buy the 16V PD injector bridge complete set — mechanically stabilise, reseal and fit cleanly.\n    \u003c\/h2\u003e\n\n    \u003cp class=\"s07-pde-copy-large\"\u003e\n      The tailored ‘ 07eins ’ solution for compatible 2.0 TDI 16V unit injector engines with Bosch or Siemens PDEs: 16V PD injector bridge, 16V PD injector fitting kit and 4 reinforced VITON seal sets in a technically sound repair package.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"s07-pde-cta-row s07-pde-cta-row--center\"\u003e\n      \u003ca href=\"\/en\/products\/original-16v-pd-injector-bridge-complete-set-for-2-0-tdi-16v-with-bosch-pdes\" class=\"s07-pde-button\"\u003e\n        Get your 16V complete set now\n      \u003c\/a\u003e\n      \u003ca href=\"\/en\/pages\/einbau-werkstaetten\" class=\"s07-pde-button s07-pde-button--light\"\u003e\n        Find a partner workshop\n      \u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e","brand":"07eins GmbH","offers":[{"title":"Bosch","offer_id":53272759271690,"sku":"071MTR001PD16-S04B","price":12438.0,"currency_code":"MXN","in_stock":true},{"title":"Siemens","offer_id":54005812265226,"sku":"071MTR001PD16-S04S","price":12438.0,"currency_code":"MXN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0536\/7883\/3847\/files\/16V_PDE-Bruecke_Komplett-Set_01.png?v=1782725876","url":"https:\/\/07eins.com\/en-mx\/products\/pd-injector-bridge-complete-set-2-0-tdi-16v-bosch-or-siemens-injectors","provider":"07eins","version":"1.0","type":"link"}