PD injector retainer / PDE repair holder for VW, Audi, Seat, Skoda TDI
The PD injector retainer
The original PD injector retainers (PD injector repair retainers), developed by 07eins in 2020 and since installed in more than 5,000 vehicles — a now proven means of repairing damaged cylinder heads and preventing damage to injector seal seats that could impair functionality.
-
COMMUNITY
popular in the German-speaking VW T5 community
-
TRUST & QUALITY
German development and product quality already installed in over 5,000 Volkswagen Group TDI vehicles
-
INSTALLATION & SERVICE
over 400 partner workshops
in Europe
Defective cylinder head? Not with the ORIGINAL 07eins PD injector retainers!
Find out how our PD injector retainers prevent cylinder head damage in TDI engines from the VAG Group in our blog post!
The ORIGINAL PD injector retainers from 07eins
Frequently asked questions about PD injector retainers
Is my vehicle also affected?
It affects all diesel engines with pump-injector units (PDE) that are bolted on one side.
How do I notice that something is wrong with my vehicle?
- Starting problems with the engine, especially during cold starts and when the engine is particularly hot
- Unsteady idling (speed fluctuations) or sporadic misfires at low speed ("choking" of the engine)
- Diluted engine oil ("engine oil increase") due to diesel mixture (oil level increases over time)
- Missing / low oil pressure if the bearing shells are already worn due to diesel in the oil
- Stalling of the engine in city traffic
- Power loss
- Compression loss
Further important information under: "What happens if I do nothing about this and do not install a body holder for the pump/nozzle unit (PDE)?"
What happens if I don't do anything about it and I don't install a body holder for the pump/nozzle unit (PDE)?
- In all diesel engines with pump-injector units (PDE) that are bolted on one side, the PDEs work their way more and more into the cylinder head over the course of the running time.
- This causes diesel to be mixed into the engine oil due to leaks.
- The lubricating effect of the engine oil is significantly reduced, which in the course of time leads to complete engine damage.
Details on the origin of the damage and the functional principle of the PDE bridge can be found in our video:
Functional principle of the PDE bridge (pump-nozzle bridge) to prevent cylinder head damage
Do I need the PDE bridge or the PDE body holders (PDE repair holders)?
For the VW T5 2.5 TDI (all engine codes), the PD injector bridge is a product option for additional PD injector stabilisation. PD injector retainers stabilise the individual PD injector bodies and are available in appropriate sets for 3-, 4-, 5- or 10-cylinder engines, depending on the engine. A dedicated 16V PD injector bridge is available for compatible 2.0 TDI 16V engines with BOSCH PD injectors. The PFS-Kit takes a different approach: it is intended to prevent the fuel lines from draining after the engine is switched off. The vehicle, engine code, PD injector version and specific findings help guide the choice; the PD Injector Problem Check provides initial guidance.
What experience is there?
The 07eins PD injector retainers have already been successfully installed more than 5,000 times in VAG TDI engines. Customers and workshops report positively on the repair approach; workshops confirm its effectiveness in eliminating the PD injector problems described.
What are PD injector retainers — and are PD injector repair retainers the same thing?
PD injector retainers provide additional stabilisation for the body of the unit injector in the cylinder head. This reduces movement and relieves stress on the sealing arrangement at the PD injector seat. They are also referred to on the market as PD injector repair retainers. The individual retainers allow suitable solutions for engine designs where there is no room for the conventional PD injector bridge.
How does the installation work?
The PD injector retainers are fitted to the individual unit injectors according to the appropriate installation instructions. During this work, the PD injectors and seating surfaces are inspected and the specified seals and bolts are replaced. Access and the work steps differ depending on the engine; therefore, choose the instructions for the specific application.
Where can I find a workshop for installation?
You can use the 07eins partner workshop finder to look for a workshop near you for installation. Give the workshop your vehicle details and engine code, describe the symptoms and tell them which 07eins solution you are planning to use, so it can prepare the inspection and installation accordingly.
Can I carry out the installation myself?
Geübte Schrauber können sich auch selbst an den Einbau der 07eins Pumpe-Düse-Produkte wagen.
Die entsprechenden Video- und PDF-Einbauleitfäden enthalten alle wichtigen Informationen mit Schritt-für-Schritt-Anleitungen: eigener Einbau (Do it yourself)
What else is useful in addition?
• Wir empfehlen immer alle Dichtungssätze der Pumpe-Düse-Einheiten zu erneuern, insbesondere die Verwendungen der 07eins verstärkten VITON-Dichtungen.
Komplett-Sets der PDE-Korpushalter finden Sie in unserem Shop:
PDE-Korpushalter für 5-Zylinder TDI (Komplett-Set), PDE-Korpushalter für 4-Zylinder TDI (Komplett-Set), PDE-Korpushalter für 3-Zylinder TDI (Komplett-Set)
• Außerdem empfehlen wir in diesem Zuge auch gleich den Leitungssatz komplett zu erneuern. Für die 2,5 TDI-Motor finden Sie in hier in unserem Shop: VW T5 Leitungssatz
Sandra Enhuber
"From the design of the homepage, the clearly laid out store, to the answers to my specific questions - I was simply absolutely satisfied. And my T5 purrs and runs better than ever before. THANK YOU!"
Klaus Grübl
"I recently did it on the 2.5 Tdi T5 bus, it's really worth it, no more diesel in the oil and starts perfectly! Seats were already badly damaged before!"
Georg Bauch
"Very good products and very good service! Quick and uncomplicated response to inquiries. My Post Caddy 2.0 SDI runs perfectly again with the PD injector retainers, idles very smoothly and starts up again immediately in any situation. A clear recommendation!"
Raik Pfeil
"Super Aufgestellt, sehr Innovativ, sehr Hilfsbereit und sehr guter Troubleshooter um evt. Probleme zu lösen. 07eins kann man mit Ruhigem Gewissen, weiter empfehlen. Qualität ist und bleibt einfach unschlagbar!!!! Danke"
Ronny Enzmann
"I am super satisfied, the products on offer are top, as is the service. Returns also work without any problems. I can only recommend it."
The ORIGINAL unit injector retainers
-
PD injector retainers / PD injector repair retainers
Buy PD injector retainersThe ORIGINAL:
One set per cylinder consisting of
1 PD injector retainer
2 screws
1 support shim
i.e. set of 3 for 3 cylinders (=complete set for 3 cylinders), set of 4 for 4 cylinders (=complete set for 4 cylinders),...
Price always refers to the complete set for one motor type
-
Complete set
Buy complete setThe 07eins Complete Set:
1 x ORIGINAL PD injector retainer (unit injector retainer) for 5-cylinder diesel engines with unit injectors
5 x reinforced VITON seal kit
1 x PD injector installation kit for 5-cylinder engines
-
Ultimate set
Buy Ultimate SetThe 07eins “Ultimate” Set:
1 x ORIGINAL PD injector retainer (unit injector retainer) for 5-cylinder diesel engines with unit injectors
5 x reinforced VITON seal kit
1 x PD injector wiring harness / cable loom for 5-cylinder engines
1 x PD injector installation kit for 5-cylinder engines
With more than ten years of experience in industrial and product design, he has always come to the same conclusion:
A product needs more than good design, and an excellent design needs more than a good product.
Like a single ingredient, the design fits into the overall recipe, which ultimately leads to success. Without this ingredient, the result would be tasteless. The ingredient on its own would not make a dish.
This metaphor aptly describes what Concept & Product Design should look like.
Featured Products
-
ORIGINAL PDE Bridge for VW T5 2.5 TDI Engines (All Model Codes)
-9% OfferNormal price $694.00 CADNormal priceBase price / per$759.00 CADSelling price $694.00 CADOffer -
ORIGINAL PDE Bridge for VW Touareg 7L 2.5 TDI | BAC BLK BPE BPD
-9% OfferNormal price $694.00 CADNormal priceBase price / per$759.00 CADSelling price $694.00 CADOffer -
Introductory discountOffer16V PD injector bridge 2.0 TDI unit injector Bosch PDE MKB AZV BKD BLB BNA BRE
-10% OfferNormal price $727.00 CADNormal priceBase price / per$807.00 CADSelling price $727.00 CADOffer -
Installed over 10,000 timesOfferORIGINAL PDE Bridge Complete Set for 2.5 TDI with Reinforced VITON Gaskets + Installation Kit
-9% OfferNormal price $1,244.00 CADNormal priceBase price / per$1,373.00 CADSelling price $1,244.00 CADOffer