07eins GmbH
07eins Performance Fuel Supply Kit (universal version for own connection)
07eins Performance Fuel Supply Kit (universal version for own connection)
Specially developed, universal mechanical valve control unit which prevents the fuel lines to the cylinder head from running empty when the engine is switched off. Version for universal use in any vehicle after individual connection to the respective fuel lines. Improved starting behavior. Reduced diesel entry into the engine oil.
SKU:071MTR101PFSK-U
Low stock levels
Availability for pickups could not be loaded
07eins Performance Fuel Supply Kit Universal
Universal mechanical valve control unit to prevent fuel lines from running dry
07eins ’s Performance Fuel Supply Kit (PFS Kit) Universal has been developed to prevent the fuel lines to the cylinder head from running dry when the engine is switched off. The universal version is designed for custom connection to the relevant fuel lines — ideal for bespoke applications outside the vehicle-specific VW T5 versions.
For custom applications with connection to the relevant fuel lines.
Specially developed valve control unit for retaining fuel in the pipework system.
Can significantly reduce starting problems following periods of inactivity and prolonged cranking.
Can reduce unnecessary fuel ingress into the engine oil caused by prolonged starting procedures.
If fuel flows back, every start becomes a strain.
In many diesel engines, starting problems can occur after prolonged periods of inactivity if fuel flows back from the lines or if sufficient fuel is not immediately available in the cylinder head area. The engine cranks for longer, starts more erratically and is subjected to greater stress during the starting process.
This is exactly where the 07eins Performance Fuel Supply Kit Universal comes in: the mechanical valve control unit helps to prevent the fuel lines leading to the cylinder head from running dry when the engine is switched off.
These signs may indicate fuel backflow or fuel supply problems
Many drivers do not initially look for a fuel valve control unit, but rather for the symptoms: poor starting, prolonged cranking, rough engine running after starting, or diesel in the oil. These are precisely the problems that can arise if a stable fuel supply is not immediately available at start-up.
The engine revs for a long time before it starts. This is particularly noticeable after a long period of inactivity, overnight or after several hours of standstill.
The engine starts less easily when cold, runs roughly at first or takes noticeably longer to run smoothly.
After starting, the engine initially runs unevenly because the fuel supply first needs to stabilise again.
Prolonged starting procedures can increase the amount of fuel entering the engine oil. This can degrade oil quality and reduce lubricity.
If the oil level appears to be rising or the engine oil smells of diesel, the cause should be investigated. Fuel in the oil poses a risk to bearings, the camshaft, the turbocharger and engine lubrication.
Every unnecessarily long start-up process puts a strain on the battery, starter motor and engine. A quicker start can make a noticeable difference in everyday use.
What the 07eins Performance Fuel Supply Kit Universal does
The universal version is a specially developed mechanical valve control unit. It is connected individually to the relevant fuel lines and is designed to prevent the lines leading to the cylinder head from draining when the engine is switched off.
Universal means: custom connection to the fuel lines
This variant is not the pre-assembled VW T5 version with vehicle-specific quick-connect couplings. The universal variant is intended for applications where the valve control unit is individually integrated into the respective fuel line system.
Suitable when a vehicle-specific plug-and-play variant is not to be used or cannot be used.
Integration takes place on the relevant fuel lines. The connection must be planned and carried out professionally.
The separate VW T5 product variant is intended for the VW T5 1.9 / 2.5 TDI with a compatible fuel filter version.
As work is carried out on the fuel system, installation should only be carried out by someone with sufficient technical experience or by a specialist workshop.
Universal version or VW T5 version?
Both variants follow the same basic principle: they are designed to prevent fuel lines leading to the cylinder head from draining after the engine has been switched off. The difference lies in the design and the connection.
For custom connection to the relevant fuel lines. Suitable for bespoke applications and non-vehicle-specific installations.
For VW T5 1.9 / 2.5 TDI with a suitable fuel filter variant. Depending on the vehicle variant, with 2 or 4 connections on the fuel filter.
Why faster starting is more than just a matter of convenience
Long starting procedures are not only annoying. They put strain on technical components and can lead to further problems in the long term. Particularly with older diesel and unit injector engines, a stable fuel supply during start-up is a key factor for everyday safety and engine protection.
Who would benefit from the universal version?
The universal version is particularly suitable for technically-savvy users, garages, conversion projects or vehicles where a pre-assembled 07eins version with vehicle-specific quick-connect couplings is not used.
Important note regarding installation
The universal version is designed for custom connection to the relevant fuel line system. Before purchasing, you must check whether integration is technically feasible and can be carried out correctly.
Work on the fuel system should only be carried out by qualified personnel. Fuel lines, connection orientation, leaks, material compatibility and secure fastening must be carefully checked before commissioning.
For the VW T5 1.9 / 2.5 TDI with a suitable fuel filter unit, please check whether the vehicle-specific 07eins Performance Fuel Supply Kit variant with 2 or 4 connections is the more suitable solution.
Further support is available on the 07eins website
Contents of delivery
- 1x 07eins Performance Fuel Supply Kit Universal
- Universal mechanical valve control unit
- Version for custom connection to the relevant fuel lines
Delivery time
Available for immediate dispatch upon receipt of payment. Orders received and paid for by 11:00 am are usually dispatched the same day.
Cleaner starts — universal connection.
The 07eins Performance Fuel Supply Kit Universal is the solution for custom applications where the aim is to prevent the fuel lines to the cylinder head from running dry and to improve starting performance.
6-month right of return
6-month right of return
See for yourself - without any risk!
If the product does not meet your expectations, you can easily within 6 months You only have to pay the shipping costs.
Before replacing the cylinder head - test the PDE bridge!
Unfortunately, in older vehicles with high mileages, the sources of faults are always varied.
We would like to support you in your decision to repair and therefore offer you the following for the use of our products Extended right of return.
If there is no improvement to your vehicle, you can use our products 6 months The product can be returned for a full refund of the purchase price, regardless of whether there are any signs of use (assembly/disassembly costs, consumables and follow-up costs are excluded).
Fast delivery times (DHL, DHL Express, UPS)
Fast delivery times (DHL, DHL Express, UPS)
We ship orders that received and paid by 11:00 are, same day (Mondays to Fridays) by DHL.
Express deliveries are made by UPS or DHL Express delivered.
Scope of delivery
Scope of delivery
1 x ready-assembled valve control unit (universal unit WITHOUT quick-connect fittings and WITHOUT fuel hoses)
Manufacturer
Manufacturer
07eins GmbH
Willenbach 12
84367 Reut
Germany
Email: info@07eins.com
Notes
Notes
All products from 07eins / engine (pump-nozzle remedy) are designed to minimize the effects of existing factory design defects on the engines concerned or to reduce their symptoms. Early use of the products can have a positive influence on the service life of the cylinder head and limit the effects of damage that has already occurred. However, our products are not able to compensate for excessive running-in marks and damage to the sealing surfaces. Any assembly/disassembly costs incurred as a result of use, consumables and follow-up costs are always the responsibility of the customer and will not be reimbursed by Pumpe-Düse-Abhilfe.
Share
