1.9 TDI (4-cylinder):

AJM, ANU, ARL, ASZ, ATD, ATJ, AUY, AVB, AVF, AVQ, AWX, AXB, AXC, AXR, BEW, BGW, BJB, BKC, BKE, BLS, BLT, BMT, BPZ, BRB, BRM, BRR, BRS, BRU, BSU, BSV, BSW, BVK, BXF, BXJ, BXE

2.0 TDI (4-cylinder):

BDJ, BKP, BMA, BMM, BMP, BPW, BRC, BRT, BST

If your engine code (MKB) isn't listed, your engine may still be affected!

Contact Contact us quickly and we’ll review your MKB just to be safe!

If your engine is affected, we'll add it to the list right away!

This will help other affected TDI drivers. Thank you very much! 🙏🏻

Reinforced VITON gasket rings in combination with our original PDE bridge also help in the event of severe run-in marks in the cylinder head: thanks to their larger diameter than the standard gasket rings, they keep the cylinder head tight again, while the PDE bridge fixes the PDEs in place and prevents them from working their way back into the cylinder head.

See for yourself - without any risk!

If the product does not meet your expectations, you can easily within 6 months You only have to pay the shipping costs.

Before replacing the cylinder head - test the PDE bridge!

Unfortunately, in older vehicles with high mileages, the sources of faults are always varied.

We would like to support you in your decision to repair and therefore offer you the following for the use of our products Extended right of return.

If there is no improvement to your vehicle, you can use our products 6 months The product can be returned for a full refund of the purchase price, regardless of whether there are any signs of use (assembly/disassembly costs, consumables and follow-up costs are excluded).

We ship orders that received and paid by 11:00 are, same day (Mondays to Fridays) by DHL.

Express deliveries are made by UPS or DHL Express delivered.

Each set contains carcase holders, end support dimensions and 07eins PDA screws for PDE body holder M4 x 10

Set of 1 contains:
- 1 x PDE body holder
- 2 x countersunk head screw for PDE body holder Thread size M4 x 10 mm
- 1 x 1 mm, 1 x 0.5 mm and 1 x 0.25 mm End support dimensions

Set of 2 contains:
- 2 x PDE body holder
- 4 x countersunk head screw for PDE body holder Thread size M4 x 10 mm
- 2 x 1 mm, 2 x 0.5 mm and 2 x 0.25 mm End support dimensions

Set of 3 contains:
- 3 x PDE body holder
- 6 x countersunk head screw for PDE body holder Thread size M4 x 10 mm
- 3 x 1 mm, 3 x 0.5 mm and 3 x 0.25 mm End support dimensions

Set of 4 contains:
- 4 x PDE body holders
- 8 x countersunk head screw for PDE body holder Thread size M4 x 10 mm
- 4 x 1 mm, 4 x 0.5 mm and 4 x 0.25 mm End support dimensions

Set of 5 contains:
- 5 x PDE body holder
- 10 x countersunk head screw for PDE body holder Thread size M4 x 10 mm
- 5 x 1 mm, 5 x 0.5 mm and 5 x 0.25 mm End support dimensions

Set of 10 contains:
- 10 x PDE body holder
- 20 x countersunk head screw for PDE body holder Thread size M4 x 10 mm
- 10 x 1 mm, 10 x 0.5 mm and 10 x 0.25 mm End support dimensions

End support dimensions for 07eins PDE body holder / PDE repair holder in thicknesses of 1 mm, 0.5 mm and 0.25 mm. 1 end support dimension is required per PDE.

07eins GmbH
Willenbach 12
84367 Reut
Germany
Email: info@07eins.com

All products from 07eins / engine (pump-nozzle remedy) are designed to minimize the effects of existing factory design defects on the engines concerned or to reduce their symptoms. Early use of the products can have a positive influence on the service life of the cylinder head and limit the effects of damage that has already occurred. However, our products are not able to compensate for excessive running-in marks and damage to the sealing surfaces. Any assembly/disassembly costs incurred as a result of use, consumables and follow-up costs are always the responsibility of the customer and will not be reimbursed by Pumpe-Düse-Abhilfe.