Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
1
/
from
2
07eins GmbH
VW PDE wiring harness AUDI SEAT SKODA VW 1.9 TDI 2.0 TDI injection nozzle pump-nozzle 038 971 600
VW PDE wiring harness AUDI SEAT SKODA VW 1.9 TDI 2.0 TDI injection nozzle pump-nozzle 038 971 600
Genuine VW PDE wiring harness AUDI SEAT SKODA VW 1.9/2.0 TDI injection nozzle pump-injector 038 971 600 (4-cylinder pump-injector engine) Typical faults with defective PDE wiring harness / PDE wiring harness: Unsteady engine running, poor starting behavior, engine jerking at idle, engine misfires when driving
1 review
SKU:071MTR002PDEL-04
In stock
Normal price
249,00 €
Normal price
299,00 €
Selling price
249,00 €
Base price
/
per
Incl. taxes (EU) / excl. taxes (outside EU and outside DE with VAT-ID).
Shipping will be charged at checkout
Quantity
Availability for pickups could not be loaded
Genuine VW quality
ORIGINAL VW PDE wiring harness / PDE cable harness
OE 038 971 600 for 4-cylinder 1.9 TDI / 2.0 TDI
If your TDI runs roughly, has difficulty starting, jerks whilst idling or misfires whilst driving, the PDE injector wiring harness may be the cause. This is exactly what the genuine VW PDE injector wiring harness with part number 038 971 600 is designed for.
Genuine part instead of the risk of a replica
Greater repair reliability for a known fault source inside the engine
Genuine
VW quality
Not a replica, but the genuine VW PDE injector wiring harness with the exact part number 038 971 600.
Known
Source of faults
Cable breaks and contact problems in the PD injector wiring harness are particularly common in older vehicles.
Fits
1.9 / 2.0 TDI
Suitable for 4-cylinder unit injector engines in Audi, Seat, Skoda and VW.
Recommended
PDE work
If the PDEs are exposed anyway, it’s particularly worth replacing the wiring harness as a precaution.
If the PD injector wiring harness is failing, this is often first evident in the engine’s running.
Heat, vibrations and ageing often cause hidden cable breaks beneath the insulating sheath inside the engine, as well as contact problems at the connectors. This is precisely what can impair the electrical control of the unit injectors.
This results in typical symptoms such as rough engine running, poor starting, jerking at idle or the engine cutting out whilst driving. A new, genuine VW PDE wiring harness restores a reliable electrical connection to the PD injectors.
What the PD injector wiring harness solves for you
Ensures the electrical connection of the PDEs
The wiring harness connects the unit injectors electrically and is crucial for precise control.
Can improve typical starting behaviour
If contact problems are the cause, a new wiring harness can specifically resolve poor starting performance.
Can reduce engine jerking and misfires
The wiring harness is a known source of faults, particularly in the case of hidden cable breaks or contact problems.
A sensible replacement when carrying out work on PD injectors
As the labour involved in replacing individual components at a later date is considerable, preventive replacement is particularly worthwhile whilst the system is already open.
Genuine part instead of the risk of a replica
Particularly with an electrical connection located inside the engine, you don’t want to risk having to carry out a second repair after reassembly.
Why choose Genuine VW?
Why we deliberately use genuine VW wiring harnesses
The PDE injector wiring harness is located directly inside the engine. This is precisely why, for quality reasons, we deliberately opt for genuine parts. Nothing is more frustrating than when, after reassembly, contact issues, misfires or starting problems persist and the engine has to be opened up again.
Greater peace of mind after the repair
When it comes to electrical connections in the engine compartment, a precise fit, high-quality contacts and long-term reliability are essential.
Open it once — do it right
As replacing the PDE injector wiring harness is labour-intensive, you shouldn’t cut corners here.
Genuine VW rather than the risk of a replica
For this sensitive component, we deliberately opt for the genuine part with the exact VW part number 038 971 600.
When replacement is particularly advisable
The PDE injector wiring harness is a typical source of faults in older pump-jet TDI engines with unit injectors. Replacement is particularly advisable if the engine is being opened up anyway, or if the symptoms point to electrical contact problems.
Rough engine running
If the engine is jerking, running unevenly or idling noisily.
Poor starting performance
If the engine is slow to start and other causes have already been ruled out.
Misfires whilst driving
If you experience noticeable interruptions under load or whilst driving.
PDEs that are already accessible
When work is already being carried out on the unit injectors as part of a repair.
Suitable for 4-cylinder unit injector TDI engines
Suitable for Audi, Seat, Skoda and VW models with 1.9 TDI or 2.0 TDI engines, as well as those with OE reference number 038 971 600.
038 971 600
038971600
1.9 TDI
2.0 TDI
Audi
Seat
Škoda
VW
4-cylinder PD injector
Reference numbers for comparison
Please check the correct OE number before purchasing and ensure it matches your vehicle.
- VW / VAG / AUDI / SEAT / SKODA: 038 971 600
- VW / VAG / AUDI / SEAT / SKODA: 038971600
- A.I.C. Competition: 57234
- FEBI BILSTEIN: 109623
- FORD: 1 218 441 / YM2114W680AA
- MEAT & DORIA: 9884
Further support on the 07eins website
Fitting instructions
You can find further support regarding work with PD injectors on the 07eins website.
Go to the fitting instructions
Workshop finder
If you don’t want to carry out the fitting yourself, you can find qualified partner garages using the garage finder.
Find a garage
PDE knowledge & problem analysis
More background information on PDE problems and suitable solutions.
Open PDE injector problem check
Contents of the pack
- 1x ORIGINAL VW PDE wiring harness / PDE cable harness
- Suitable for 4-cylinder 1.9 TDI / 2.0 TDI
- Suitable for Audi, Seat, Skoda and VW unit injector applications
- OE number: 038 971 600 / 038971600
Delivery time
Orders received and paid for by 11:00 am are usually dispatched the same day.
Important note
Please check the fit before purchasing using the OE number 038 971 600 and the vehicle application.
The wiring harness is designed for 4-cylinder unit injector applications and, if in doubt, should be checked against the vehicle’s specifications beforehand.
Buy the genuine VW PDE injector wiring harness — before contact problems turn into actual misfires.
The tried-and-tested solution for 4-cylinder unit injector TDI engines with OE 038 971 600: genuine VW quality for a clean electrical connection, improved starting performance and greater reliability when carrying out repairs.
Fast delivery times (DHL, DHL Express, UPS)
Fast delivery times (DHL, DHL Express, UPS)
We ship orders that received and paid by 11:00 are, same day (Mondays to Fridays) by DHL.
Express deliveries are made by UPS or DHL Express delivered.
Manufacturer
Manufacturer
Volkswagen AG
Berliner Ring 2
38440 Wolfsburg
Deutschland
Tel.: +49-5361-9-0
Fax: +49-5361-9-2828
Share
T
Toni Super verarbeitet und es funktioniert, danke
Reviews in Other Languages
Invalid password
Enter