Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
1
/
from
2
07eins GmbH
Genuine VW PDE wiring harness Harness 16V 2.0 TDI AUDI SEAT SKODA VW 03G971033L Injector unit injector
Genuine VW PDE wiring harness Harness 16V 2.0 TDI AUDI SEAT SKODA VW 03G971033L Injector unit injector
Genuine VW PDE wiring harness Harness for AUDI, SEAT, SKODA, and VW 16V 2.0 TDI unit injector unit injector (03G971033L) (4-cylinder unit injector engine) Typical symptoms of wiring harness defective PDE wiring harness: Rough engine operation, poor starting, engine surging at idle, engine misfires while driving
No reviews
SKU:071MTR001PD16-L-04
Low stock levels
Normal price
499,00€
Normal price
Selling price
499,00€
Base price
/
per
Incl. taxes (EU) / excl. taxes (outside EU and outside DE with VAT-ID).
Shipping will be charged at checkout
Quantity
Availability for pickups could not be loaded
wiring harness-16v">
Genuine VW Quality
ORIGINAL VW wiring harness for 16V 2.0 TDI
OE 03G 971 033 L for compatible 16V 2.0 TDI unit injector engines
The original VW wiring harness with OE number 03G 971 033 L is the ideal electrical accessory for work on 16V 2.0 TDI unit injector engines. Especially when the engine is already open for PDE overhaul or for installing the 07eins 16V PD injector bridge, this known source of faults can be replaced at the same time.
Genuine VW part instead of the risk of a replica Ideal as a supplementary measure when installing the 07eins 16V PD injector bridge or during a PDE overhaul.
Original
VW Quality
Not a replica, but an original VW / VAG wiring harness with OE part number 03G 971 033 L.
Ideal
for PD injector bridge 16V PD injector bridge
A useful addition if the engine is already open for the installation of the 07eins 16V PD injector bridge.
OE
03G 971 033 L
Compatible with suitable 16V 2.0 TDI unit injector applications with the corresponding OE number.
Recommended
for PDE work
If the PDE units are accessible anyway, replacing the wiring harness as a precaution is a sensible measure.
If the wiring harness ages inside the engine, it can interfere with PDE control.
The PDE wiring wiring harness is located directly in the vicinity of the unit injector elements and is constantly exposed to heat, oil, vibrations, and aging. As mileage increases, contact issues, brittle insulation, or broken wires can occur.
This can result in rough engine running, starting difficulties, sporadic misfires, or electrical faults in the PDE control system. Therefore, when the engine is disassembled, the wiring harness is a component that should not be overlooked.
Why Replacement Is Especially Important During 16V PDE Work
Renewing the electrical connection to the PDEs The wiring harness establishes the electrical connection to the unit injector elements and is crucial for reliable control.
A Useful Complement to PD injector bridge 07eins 16V PD injector bridge The 16V PD injector bridge provides mechanical stabilization. The original VW wiring harness complements this measure on the electrical side.
Ideal when the engine is already open If the valve cover, PDEs, and adjacent components are already accessible, the wiring harness can be replaced with relatively little additional effort.
Genuine part instead of troubleshooting later After a PDE overhaul, the engine should run reliably. Otherwise, an old or damaged wiring harness may cause problems again after reassembly.
Sound repair logic Mechanical reinforcement, new seals and a properly functioning electrical connection are all integral parts of a thorough PDE overhaul.
Recommendation from 07eins
The ideal complement to the 07eins 16V PD injector bridge
When installing the 07eins 16V PD injector bridge, the unit injector elements are mechanically stabilized. It is precisely in this context that it makes sense to also critically inspect the PDE wiring harness and, if necessary, replace it directly with an original VW part.
Consider Mechanics and Electronics Together The 16V PD injector bridge addresses the mechanical guidance of the PDEs. The wiring harness ensures the electrical side of the PDE control.
Open It Once — Do It Right If the engine is already open for PDE work, replacing the wiring harness is a sensible preventive measure.
Less risk after reassembly An old wiring harness can continue to cause starting problems, misfires, or rough engine running after the repair.
Why Genuine VW?
Why we deliberately choose Genuine VW for this assembly
The wiring harness is located inside the engine and cannot be accessed after reassembly without additional labor. This is precisely why an original part is the better choice here than a cheaper aftermarket replacement with uncertain long-term quality.
Precise Fit Genuine VW / VAG wiring harness with matching OE part number 03G 971 033 L for the intended applications.
Contact Quality For an electrical connection directly to the PDEs, reliable contact is essential—not just during installation, but over the long term.
Repair Reliability After installing the 16V PD injector bridge or following a PDE overhaul, a second round of repairs due to an old wiring harness should not be necessary.
When Replacement Is Especially Recommended
Replacement is particularly advisable when the engine is already being opened up or when symptoms indicate contact issues in the PDE control system.
Installation of the 07eins 16V PD injector bridge If the PDEs are accessible during the bridge installation, it makes sense to replace the wiring harness at the same time.
Overhaul of unit injector assemblies During gasket replacement, PDE testing, or PDE overhaul, replacing the wiring harness is a logical accompanying measure.
Rough Engine Operation If the engine jerks, runs unevenly, or idles erratically.
Starting difficulties or misfires If the engine is hard to start or experiences sporadic misfires while driving.
Suitable for compatible 16V 2.0 TDI unit injector applications
The wiring harness is designed for compatible 16V 2.0 TDI unit injector engines that use OE number 03G 971 033 L or 03G971033L. Please always verify compatibility using the OE number, the engine code letter, and the vehicle data.
03G 971 033 L 03G971033L 2.0 TDI 16V unit injector PDE Hose wiring harness PDE Wiring Harness Genuine VW Audi Seat Skoda VW
Reference Numbers for Comparison
Please check the correct OE number before purchasing and verify that it matches your vehicle. For the 16V 2.0 TDI, there are different wiring harnesses depending on the vehicle, engine variant, and model.
- VW / VAG / AUDI / SEAT / SKODA: 03G 971 033 L
- VW / VAG / AUDI / SEAT / SKODA: 03G971033L
- Comparable part number (as listed by some parts suppliers): 03G 971 033 D
- Product Type: wiring harness / Adapter Hose wiring harness / PDE Wiring Harness
- Application: unit injector injectors for compatible 16V 2.0 TDI engines
Price & Quality
Why Genuine Parts Are More Expensive Than Aftermarket Wiring Harnesses
In the aftermarket, cheaper aftermarket and repair kits are also offered for OE part number 03G 971 033 L. At 07eins however, repair reliability is our top priority for this assembly: The wiring harness is located inside the engine and must function reliably after reassembly.
Genuine VW / VAG Quality Carefully selected to ensure a reliable electrical connection directly to the unit injector injectors.
No cost-cutting inside the engine A low-cost wiring harness is only a good deal if the engine doesn’t have to be opened again afterward.
Useful for high-quality PDE repairs Anyone installing the 16V PD injector bridge or overhauling the PDEs should carefully consider the electrical connections.
Additional support on the 07eins website
16V PD injector bridge The mechanical 07eins solution for stabilizing the PDEs in compatible 16V 2.0 TDI engines. Go to PD injector bridge 16V PD injector bridge
Installation Instructions You can find additional support for PDE-related work on the 07eins website. Go to the Installation Instructions
Workshop Finder If you don’t want to perform the installation yourself, you can find qualified partners using the Workshop Finder. Find a workshop
PDE Knowledge & Problem Analysis More background information on PDE problems, symptoms, and suitable solutions. Open the PDE Problem Check
What’s Included
- 1x ORIGINAL VW / VAG wiring harness for unit injector injectors
- OE Number: 03G 971 033 L / 03G971033L
- For compatible 16V 2.0 TDI unit injector applications
- Useful addition to PD injector bridge 07eins 16V PD injector bridge
- Ideal for PDE overhaul, gasket replacement, or when the engine is open
Shipping Time
Orders received and paid for by 11:00 a.m. are usually shipped the same day.
Important Note
Please verify compatibility before purchasing using the OE number 03G 971 033 L, the engine code letter, and the vehicle specifications. For 16V 2.0 TDI unit injector engines, different wiring harnesses are available depending on the model.
This wiring harness is a useful addition to a PDE overhaul or the installation of the 07eins 16V PD injector bridge, but it does not replace a diagnosis of other possible causes of starting problems, misfires, or rough engine idling. Please note: When used in combination with the 16V PD injector bridge, the plastic rail of the VW wiring harness must be shortened to allow for sufficient space. In the 16V PDE Bridge Ultimate Set, we have already shortened the VW wiring harness for you.
Replace wiring harness original VW wiring harness—while the 16V 2.0 TDI is open anyway.
The perfect complement to PD injector bridge 07eins 16V PD injector bridge and the PDE overhaul: Original VW / VAG wiring harness with OE 03G 971 033 L for a reliable electrical connection of the unit injector units.
16V 2.0 TDI Engine Code Letters (Affected Engines)
16V 2.0 TDI Engine Code Letters (Affected Engines)
AZV, BKD, BLB, BNA, BRE, BRF, BVF, BVG
If your engine code (MKB) isn't listed, your engine may still be affected!
Contact us right away and we’ll check your MKB just to be sure!
If your engine is affected, we’ll add it to the list immediately!
This will help other affected TDI drivers. Thank you very much! 🙏🏻
6-month return policy
6-month return policy
See for yourself—with absolutely no risk!
If the product doesn’t meet your expectations, you can easily return it within 6 months—you’ll just have to cover the shipping costs.
Before replacing the cylinder head—test PD injector bridge 16V PD injector bridge!
Unfortunately, in older vehicles with high mileage, there are always many potential sources of failure.
We want to help you make an informed decision about repairs, which is why we offer an extended return policy for our products.
If you don’t notice any improvement in your vehicle, you can return our products within 6 months for a refund of the purchase price, regardless of whether there are signs of use (installation/removal costs, consumables, and consequential costs are excluded from this).
Fast shipping times (DHL, DHL Express, UPS)
Fast shipping times (DHL, DHL Express, UPS)
We ship orders received and paid for by 11:00 a.m. the same day (Monday through Friday) via DHL.
Express deliveries are shipped via UPS or DHL Express.
What's Included
What's Included
Our recommendation for cylinder heads with more severe damage
Our recommendation for cylinder heads with more severe damage
Reinforced 16V Viton sealing rings, used in combination with our original 16V PD injector bridge also help with more severe running-in marks on the cylinder head: Because their diameter is larger than that of the standard gasket rings, they restore the cylinder head’s seal; the 16V PD injector bridge holds the PDEs in place, preventing them from grinding into the cylinder head again.
Manufacturer
Manufacturer
Volkswagen AG
Berliner Ring 2
38440 Wolfsburg
Deutschland
Tel.: +49-5361-9-0
Fax: +49-5361-9-2828
Notes
Notes
All 07eins / Engine products (unit injector remedies) are designed to minimize the effects of factory-installed design defects in the affected engines or to alleviate their symptoms. Early use of these products can positively impact the service life of the cylinder head and limit the effects of damage that has already occurred. However, even our products cannot compensate for run-in marks and damage to sealing surfaces that are too advanced. Any installation/removal costs incurred through use, consumables, and follow-up costs are always the responsibility of the customer and will not be reimbursed by unit injectorAbhilfe.
DÜSENFUCHS—your go-to partner for injectors!
- DÜSENFUCHS is an official sales and partnership partner of 07eins GmbH
- DÜSENFUCHS Pump-Nozzle Assemblies">Refurbished unit injector assemblies recommended by 07eins!
Share
Reviews in Other Languages
Invalid password
Enter